HOME About NCOT Documentation Social Media Mastodon Support Me

Drink tea and make things

Blog Electronics Labs ZX Spectrum Next Computer Science Z80 Homebrew Computer Arduino and Microcontrollers

DIY Home Solar Finished

Posted:

After a week of testing and tweaking, my DIY solar shed upgrade is complete. And it seems to work pretty well!

Last week I bought a solar panel, inverter and some lead acid batteries and set up a solar system in my shed, with the intention of powering my servers. It seems to work pretty well and I have it all integrated into Home Assistant. I’m going to do a load of videos on it and Home Assistant in general.

It seems that when it’s sunny the panel produces about 150W which is enough to run the devices and charge the battery. Once the sun goes in, it stops providing power and the battery powers things until it runs out.

This is something I don’t understand - how to know when the battery is low, and when it’s “empty”. There’s a lot of dark arts involved, and I think the main trick is to just buy more batteries. Could also do with another panel to charge the batteries quicker, they don’t seem to remain full but I don’t know if this is because the inverter is drawing power, or because they’re not actually fully charged.

Think I’ll stick a power monitoring smart plug on the AC part and see what it does. I should probably monitor the actual current flow in and out of the battery using a current shunt. It feels a bit messy though, the battery cables are pretty thick.

Related Content

  • Home Assistant Solar Monitoring
    October 22, 2022
    I've managed to get Home Assistant working out how much the energy produced by my solar system would cost me off the grid.

  • Workshed Tidying
    October 17, 2022
    I tidied up my workshed ready for some new projects.